Moisture meter for wood & concrete, LU-MS7003


Designed to check the Moisture level of wood, concrete, and other non-wood material. Uses the 2 pins electrode to measure the conductive ability of the material, then converts it to percentage of Moisture content.

Part No: LU-MS7003 Moisture meter, concrete & wood – two pins type to40% in wood

Need more info?

Stock comes from different warehouses, delivery may take 1-4 working days. If urgent check availability at toll free: 0800 323 327

Available on back-order

SKU: LU-MS7003 Category:


 Material Moisture meter

Measure the moisture content in most common building materials with the Lutron MS7003 moisture meter. The MS7003 works based on conductivity between two sharp pin electrodes which are pushed into the sample being tested. There are two ranges – wood and non wood products including concrete. Because it is a basic meter with +/- 5% accuracy, there is no need to discriminate between timber types in the set up, so it is very easy to use and interpret.

  • Range for wood  6%-40%
  • Range for concrete 0-100% relative moisture
  • Bargraph and digital display — dispaly hold and max, min [recalled]
  • Optional separate probe for difficult locations
  • Reading in under 1 second
  • 216.5×68.5×29.7mm 250gm

Delivery 4-6 weeks

Downloads:   Data sheet        Manual